Posted on

Boat Building – 2 Of The Best Kits Available!

If you've been looking out for guidance on building a boat without attending a class, then you need look no further than this article. We have put together the best resources available to bring you the two best options for boat building kits you can try out in the privacy of your home and also find all you need to build a real or model product for yourself. Guaranteed to delight and fascinate, these two options for using quality boat building kits are among the 2 easiest ways to put together a hobby idea that will keep you gainfully occupied.

Those keen to attend this hobby on a limited scale can opt for the first choice as this is for an original purpose only while the second option is ideal for advanced skills persons who'd like to own a real boat they can actually go sailing in. We give you info on both kinds of kits available in the market, take a look:

1. Model Boat Building Kits: are ideal for those who love the design and quick-skill efforts using those calls for as these are made to patterns like the original size ones, except they are smaller in size so used for oral purposes. As these types of boat building kits come according to the skill level of each individual, you can begin with trying your hand at the beginner level and graduate to the expert ones as you learn to use and build more complex models. Basic beginner boat building kits are ideal for hobbyists and kids.

2. Real Boat Building Kits: are not for the amateur, but the more seasoned hobbyist who has some level of expertise to put together the various minor and major parts that come with these more complicated level designs for actual boats that sail on water. Since these kits come with every conceivable accessory and parts that will help the crafter make the best boat in their budget, (including tools and an instruction booklet) these kits only require one to decide the model they like and go ahead with hours of fun guaranteed for a hobby that will help their dreams set sail with them aboard.

Time and dedication invested into the hobby of building an actual boat will determine how long the boat building takes as will skill levels.

Putting together the above types of boat building kits is not only fun, but also a great satisfaction for the hobbyist who likes to craft productive items in free time that can be put to good use. Since there are many different design choices in both kinds of kits, over a period of time, one can put this hobby to good use and even earn money and recognition for skills put to good use! Model boat building kits are easy, affordable and fun past-time for retired people and those with lots of free time.

Source by Abhishek Agarwal

Posted on

Prevent Your Building From Any Infiltrators – Outdoor Surveillance Camera Help

You often get to hear about the vandal's wrath, destruction of cameras before they barge in to your office, house, show room or banks. How can you prevent this?

To prevent this, you need to install a modern outdoor surveillance camera in order to monitor what is happening outside the home. You must know what are the additional features you need to have in a security device so that the device is not subject to their vandalism. Make use of a dome shaped device such that it is not easily noticeable. It also offers a good interior as they come in different hues like a lamp shade. They look like dome shaped lights which conceal the actual security device. Is not it great?

There's more to this. You can possibly choose the one with advanced tinted glass. This hides the direction of the device and one will be left clueless about its focus angle. No infiltrator will be able to view the direction of the device and will get easily misled. You are smarter than an infiltrator, is not it?

The other factor you need to pay attention to is the weather conditions. Since you are installing this device outside, you must ensure that it meets the weather conditions. You may have to have a roof or have them under a shaded area. Remember that it should be placed where there is enough lighting or you should pick up one with inbuilt lighting in the device itself. Some even come with a wiper like your car wipers. They are suitable for rainy season too. Placing them near air ducts and vents will offer better visibility so making them free of fog, mist and its lens remains clear.

Place them in an elevated area such that no body notices it nor destroys it!

Source by Vijay K Shetty

Posted on

RC Airplane Scratch Building – EPS-Depron Vs EPP

If you are considering the option of building your own foam RC airplane, then you will want to weigh the options of which material to build it from. These two materials, EPS-Depron and EPP, are the most commonly used foams for just such a task.

EPS (expanded polystyrene), comes in several forms, depending on the application, however, Depron is the form used commonly for RC airplane fabrication. Depron is stiff and brittle, yet easily painted if using the correct type of paint. This foam is easy to cut, and moderately easy to sand to the desired contour. Standard Cyanoacrylate glue (CA or superglue) will dissolve this type of foam, as well as some spray adhesives and spray paints. There is no greater disappointment than to spend your valuable time, money, and effort building a beautiful model, bringing out the spray paint and watch all your craftsmanship dissolve into nothing but a pile of goo! So, take special care to select a friendly adhesive and paint. Low temperature hot glue works great, and water-based paints are preferred. Experienced models are most likely to select EPS-Depron to build an RC airplane from scratch because of its stiffness and ease of contouring.

EPP (expanded polypropylene) is soft and pliable; And because of it's softness is able to withstand moderate impacts. This foam is difficult to cut and near impossible to sand. Contouring can be accomplished, however, with a rasp tool. Cutting can be done with a very sharp knife, box cutter, or a hot wire cutter. Adhesives work fine on EPP including CA, low temperature hot glue, and many others. Painting onto EPP can be accomplished without worry of destruction by dissolving. Beginning RC pilots will be happier with their EPP construction because the RC airplane will be able to withstand crash after crash during the learning curve and still fly.

Construction of an RC airplane from either EPS-Depron or EPP is basically the same, with the exception of the slight differences in technique because of the material softness or brittleness. In both cases, you can use low temperature hot glue, a hot wire cutter, a jigsaw, and a box cutter. The main construction differences come in the areas of the aircraft that need extra support. The softness of EPP allows it to flex. Therefore, it is highly recommended that you add carbon rods in critical areas by cutting a groove into the material where you want the reinforcement, place the carbon rod in place, and fill in the groove with hot glue. Also, additional reinforcement of large areas can be accomplished using fiberglass mesh and epoxy, or by using duct tape. Control horns should be reinforced locally on both sides of the foam, and engine mounts should be doubly secured so as to not strictly sole on just glue by cross pinning the mount through the airplane body. Then the body of the foam plane can be painted, covered with colorized shrink wrap, tape stripes and stickers of your choice. Add electronics, control rods, and an engine, then let the excitation begin!



Source by Jeffrey Lawson

Posted on

How a Boom Barrier Can Help You for Efficient Security of a Building

According to your purpose of Operation an Automatic Security Gate or Boom Barrier varies in Size, Shape and Operation. If you want to Protect your Home or Business an Automatic Security Gate is an added Security. A Gate makes much harder to get in and out easily. Automatic Security Gates include various Mechanical Components such as Door Barriers, Electronic Locks and Boom Barriers which will restrict access to People whose Identity should be Verified by a Smart Card, RFID Card Reader or Biometric Sensor.

The Capabilities of an Access Control System Automatic Gates varies greatly. Boom Barrier Security Gates have been designed to handle Single Door, Multiple Doors, Film Theater Security Electronic Door Lock or a Hospital Security Block System to control the entry and the exit of Vehicles. Nowadays a complete Automatic Security Boom Barrier Security Gate System is inefficient and incomplete due to lack of efficient Software. Basically these Software controls every movement with the help of integrated Hardware and Mechanical Components.

It is better and advisable to use a Security Automatic Barrier System instead of using a Security Guard since the Boom Barrier Security Gates are Automatic and Fast. An Access Control Boom Barrier Gate is an Automated Access Control through highly efficient Security System for Builders and Flats to Confirm their Security from the outside World. Boom Barrier Security Gates Secure your Homes and Buildings from unauthorized entry of Vehicles or men into your Compound.

Home Surveillance Systems and Access Control Security Devices such as CCTV Cameras, Theft Control Devices, Biometric Door Locks, Fingerprint Automatic Security Locks and more. But the Automatic Door Security Gate System is the most Popular and Efficient among all these Security Devices. Multiple Buildings have Boom Barrier Security System as Parking Gates. A CCTV Surveillance System attached to a DVR Security Device can be attached to an Automatic Security Boom Barrier for Proper Record management of Entry and Exit Security into a Building.

So do not be afraid of applying for an Automatic Security Gate for your new Building or Apartment far better than putting a CCTV or Theft Control Device for stopping employee theft and providing a safer workplace. An Automatic Security Gate is keeping your Family, Business Solutions and Assets with Safety, Security and Comfort. A Car Parking Gate is an efficient Device which has useful Properties such as

It prevents the unauthorized entry of vehicles into a particular property.

It prevents the entry of unrecognized vehicles into a property. (This can be done through attaching mechanisms like card swipe or license plate recognition to the barrier.)

It monitors the entry and exit of vehicles.

It records the registration number of vehicles parked in the locality.

Automatic Door Opener Car Parking Boom Barriers can be applied to:

– Shopping malls

– Residential buildings

– Public buildings like hotels, colleges and hospitals

– Parking areas for staff in commercial buildings

An Automatic Security Barrier has an advanced Control System for Personal Security and Vehicle Security Automation inside a Building or an Apartment.



Source by Aimy T Thomas

Posted on

Building RC Planes and Then Flying RC Planes

Flying and building model airplanes is a thing We’ve valued for most of my entire life. Like a lot of folks my age, I got started out in the activity as the child flying control-line aircraft. My first aircraft must have been a Cox PT-19 .049 flight trainer. It was heavy and did not fly well, however I loved it. After the Cox was cracked past repair, dad took me into a authentic hobby store where we picked my first model. My father was obviously a model airplane enthusiast from long ago. In those times, people crafted their models with kits. Prefabricated ARF (Almost Ready to Fly) models were not really on the market then. So, from the beginning, I needed sit and learn to make airplanes just before I got an opportunity to fly them.

Ages eventually, I started flying radio control planes. I began with a 2 meter glider, then shifted on to powered flight. The pioneer ARF form of plane I bought was a Duraplane Aerobat 40. It’s supposed to generally be about indestructible. I did ultimately manage to ruin it, nonetheless. It’s heavy and was required to be flown at a high rate of speed. What I found out in early stages is that these prefabricated ARF planes were suitable, but they were a tiny bit heavy and did not fly as well as my kit built aeroplanes.

The same does work at present. The best flying aircraft is built to be built strong, light-weight and true. The old saying is “build light-flies right” and “build straight-flies great”. Any time you choose an ARF or a RTF (Ready To Fly) R/C airplane today, you’re probably purchasing a product which was slapped together in a factory in China as quickly as possible, when using the most inexpensive elements and supplies to complete the job. Admittedly, some ARFs can beat some, but the good ones do not ever compare with the caliber of a materials you will find inside a trustworthy RC kit.

Regrettably, the completed expense of a kit made plane compared to a pre-built aircraft is approximately exactly the same. Due to the fact you’ll be able to obtain a very good .40 size RC trainer kit for about $75, it may lead you to feel that it is cheaper than buying a similar type of ARF plane for somewhere in the market of $110. Just what you might want to look at is that you just may still need to purchase a gas tank, wheels, wheel collars, fuel tubing, adhesives, covering material and also other goods that are not included in your RC kit. Almost all good RC kits will list the required items to conclude the job. This alone is enough to push some people who are wanting to get in the air in the direction of obtaining an AFR or RTF form of plane. Why would you want to buy something that requires days or weeks to make if it will set you back around the same as a pre-built aircraft?

The solution for me personally is only the gratification from the building process. If you appreciate playing or making use of your hands to bring about things, then you’ll most likely love developing an aircraft from an RC kit. But when you are hesitant to attempt to build something following your catastrophe when using the particle board entertainment center your ex carried home from Wal-mart for you to set up, give yourself a break. The plans that come in the good kits are likely to be full-size and also well written. Almost all folks are around the ordinary skill-level and definately will do fine building from a kit. Should you conform to into that group, you might always ask your kids (or grandkids) to assist.

Source by mattwt6fmi

Posted on

How To Care For A Puppy: Building Confidence

Puppies can be a challenge, especially for first-time dog owners. Without any previous experience, it’s hard to know how to care for a puppy. Because of this, owners can make mistakes that can become lifelong problems for the puppy and for the owner.

One big problem is socialization and building confidence. Puppies that do not interact with other animals (including dogs, cats, and various household pets) and people outside the family can develop fears that can make them aggressive.

Fear aggression is one of the reasons so many dogs end up getting put down because they become a danger to the family and neighbors. You do not have to let this happen to your puppy.

Once you learn how to care for a puppy and build its confidence, you will eliminate this problem, but you have to start early in your puppy’s life. You can overcome the problem in older puppies, but it will take a bit more work.

Start building your puppy’s confidence early

Consider for a moment how he must feel after being pulled from his mother and littermates and put in an unfamiliar home with beings he does not recognize. No doubt any puppy, regardless of his level of confidence, will experience stress and a bit of anxiety.

It’s up to you to gain his trust and continue building the confidence that he had when he was with his mother.

Here are some things to consider when socializing your puppy.

1. Most importantly, make sure he has received all of his shots before allowing him to come in contact with other animals.

2. Let him meet people of varying ages, sexes, sizes and shapes. Allow him to become familiar with strollers, wheelchairs and walking canes.

3. Introduce him to people who are wearing unique outfits: various hats, glasses, uniforms, and even masks and costumes (you don’t want him to become scared at the Halloween parade).

4. Walk him where people are running, walking, riding on scooters and bikes, and using rollerblades and skateboards. They all have unique sounds and ways of moving that can alarm a puppy. Let him get used to them gradually in a normal environment, like at the park or on a busy street.

5. Allow him to meet all kinds of animals, including horses, livestock, cats, pet birds, guinea pigs, squirrels and any others that are around.

As he goes through these meetings and interactions, he will become more accustomed to the variety of sounds and sights that he will meet in his life. You also will be building his confidence levels so that he is better able to adapt to new things.

Building confidence is just one aspect of how to care for a puppy, but it’s a good place to start.

Source by Sylvia Dickens

Posted on

Advantages Of Building Plastic Models Kits Over Video Games

People have found many different ways to spend their spare time. Models and hobbies allow individuals to expand their horizons and keep their minds active while enjoying their leisure time. Playing video games has become one of the leading ways to spend one’s time when not working. However, it might be wise to consider the advantages of building plastic models kits over video games.

Plastic model figures can be created of boats, cars, planes, and/or even spacecraft. They can be built to any scale one desires, though 1:24 is the most common. They can also be designed and built with different levels of complexity.

As hobbies go, the items can teach skills that video games cannot. One of the first things one will learn from assembling a model is how to plan out a project in steps. One must choose a starting point and an order in which the parts are to be assembled so that the finished project looks the way one wants it to. Most kits come with a set of instructions, but there is a choice of whether to follow them in precise order or change the order up to make assembly more convenient.

It has long been said that patience is a virtue. While video games can be entertaining, they do nothing to teach one about patience. Assembling a model, on the other hand, teaches one how to be patient. This is because the glue used in assembly must be allowed to dry before one moves to the next step. Failure to do so could result in parts that have been put together falling apart under strain.

Video game companies have long touted the development of hand/eye coordination as a benefit of playing their products. However, assembling small pieces can take this farther than simply learning to push buttons. One must focus on placement of parts in the correct positions in order to assure being able to finish the project.

In addition, assembling plastic models kits can go a long way toward preparing one for a career. There are a wide range of occupations that depend on a scale model to make their jobs easier. Scientists used such items to represent things that are too small to see with the naked eye or too large to contain. Architects and engineers use scale models to visualize and design buildings, bridges, and other structures. Assembling plastic models as a child can help one learn how to place pieces in an intricate item that will be useful later.



Source by Abd Kahar B Sarip

Posted on

How to add reinforced concrete columns to an existing building

Reinforced concrete columns are mainly used to carry loads of a building. They transfer these loads to a suitable safe soil bearing capacity. Sometimes a building may have only the load bearing walls. These structure may not safely carry an additional floor above. The house may also need a roof change from light weight materials like galvanized iron sheets to the heavier concrete or clay roofing tiles. These will necessitate more bracing of the unit to carry these additional loads.

The reinforced concrete columns in a building can be finished using plaster render, cladding’s or left with the concrete color. Whatever the finish, it should give good aesthetics to the wall facades. These columns may be erected free standing or within the building fabric. They may have the usual rectangular or square shape, though it may also have the circular shape. It is important to assess the points where to erect columns. This is so that all the necessary supports are put in place before any cuttings are done safely.

The procedure of adding reinforced concrete columns, is by marking out all the points to add columns. The walls and roofs are supported using props and bracing. The columns should be place at all building corners and any load bearing walls intersections. The wall is cut carefully up to the beam level. Concrete at the roof beam level is hacked and removed to expose the reinforcements. The wall opening should have a masonry toothing. A pit is excavated for the foundation base and column starter bars. The base and the column is then cast and vibrated well.

The column starter is cured after seven days. Additional reinforcement is added to the roof level and joined with the beam steel. Hoop iron is done at alternate courses passing through the steel from both the wall ends. This is to allow the wall to be strengthened after the cutting. Form work is then done. Concrete is cast and vibrated. The form work is removed after seven days of curing. The process is repeated at every point where they will be a reinforced concrete column. The appropriate finish is then done to match with the existing wall surface facades.

Source by Andrew Karundu

Posted on

RC Drift Cars, Tips for Building Your Own

Especially since the release of “The Fast and the Furious, Tokyo Drift,” we all know that car drifting is very popular in Japan. However, the popularity of the sport is spilling over into the United States rc car market. Did you know there is such a thing as rc drift cars? There is, in fact rc drifting has become a highly recognized sport. Once you see it, you will be hooked. Here are some things you should know when building an rc drift car.

First of all, electric rc cars are far better than nitro models when it comes to drifting. That is because it’s easier to control the throttle of an electric car, especially during a drift. Attempting to drift with a Nitro rc cars leads to a burnt out clutch and an overheated engine most of the time. It is highly recommended to use a shaft drive rc car as opposed to a belt driven transmission for your drifter. This allows for the best throttle response and avoids the backlash which often occurs due to the belt design. If you are building from scratch, shaft drive cars will make for the best drifters.

When it comes to the motor, you need high torque. It is very common to use 19 turn motors. The standard Mabuchi 540 works fine as well. Be sure to gear your car for acceleration and not for top speed. Also be sure to use a four wheel drive machine. 4×4 is much easier to control when drifting. If you already have a functional touring car, than turning your car into a drifter simply requires a tire change. RC drifters usually use tires made up of PVC pipes. Although you can also use ABS pipes, which are slightly softer than PVC material, or rubber tires that would be wrapped in electrical tape.

If you want to make your own PVC tires you need to buy a ten feet long, two inch diameter PVC pipe from your local hardware store. Get them as round as possible and avoid shops that sell deformed, or oval-shaped pipes. Another alternative is to buy specially made drift tires that are manufactured by Yokomo. These are rubber tires that have grooves in which you mount the Yokomo made drift ring onto. Another inexpensive way of building your own drift tires is to use a plastic cap that can be found on a spray paint can. These typically fit onto a regular touring car rubber tire and it would be much easier than cutting your own PVC tires.

When building your rc drift car just remember to get the accessories that are sized just right. A lot of times PVC pipes are slightly larger in diameter and a drifter is meant to be composed exactly to perfection. Other than that, stay away from nitro rc cars and form your new rc drift car out of any electric rc car out there. RC drifting has never been so easy.

Source by Kasan Groupe

Posted on

Building A Hobby Crucible Furnace

Efficient melting of metal in the hobby foundry requires a simple, but well designed, easy to operate melting furnace. A well-designed furnace does not necessarily mean it will be expensive to build, or that it is complicated to construct and operate.

If you’re just beginning your metal casting journey, there will be a multitude of questions that will need to be answered; and if you follow some simple methods, your learning curve will be dramatically reduced.

A well-built furnace will take you another step along the path to being able to maintain an important piece of equipment for your hobby foundry set up. Without an efficient furnace your hobby metal casting experience could well be one of total frustration & disappointment.

It is possible to build a furnace from scrap materials found around the workshop. This is not to say that it will look trashy, or poorly made, the point being made here is that you do not need to build everything from new materials. The only material you will need to buy is the special high temperature resistant refractory to line the furnace walls with, plus a few brass connectors from the local plumber for the gas feed line and some brass rod to custom-make your own special gas jet for the burner. The rest you can quite easily make yourself if you have metal working skills.

One of the biggest problems the hobby foundry worker has to overcome, is to acquire the knowledge to build a high-energy output burner, the subject of burners can raise many arguments amongst hobby foundry workers, and there is a straightforward solution to building an efficient burner, by following simple instructions any practical person can fabricate an efficient burner that will quickly melt metals such as aluminium and bronze without effort. The process to build a high output furnace burner is really quite simple, but there are a few small parts that need to be machined on a lathe.

If you don’t have the luxury of a lathe in your workshop, perhaps a friend can help you out. Although, many hobby metal workers do own a metal lathe these days, it is almost a must have for the average home engineer in this ever-increasing DIY age. You will also need a MIG or ARC welder (Max 180 Amp) to fabricate the furnace.

Be very careful with your gas pipe & joint connections, although there are no great line pressures involved with the gas feed to the burner, but any small leak could lead to the possibility of a dangerous explosion.

Propane gas expands between sixty and one hundred times once exposed to air. So be aware, gas is the most efficient fuel you can use to fire a crucible furnace, but it can also be an extremely dangerous material. You need to follow any building instructions carefully and not be tempted to take any shortcuts as they may lead to personal injury.

If you are a resourceful, practical person, you could build your own crucible furnace for less than $70.00US, this is a mere fraction of the cost of a commercial unit, and should be equally as efficient, and provide many years of reliable melting service.



Source by Colin Croucher